Ten in one docking station
2*USB 3.0+ 1*USB 2.0 +1*SD card+1*TF+1*HDMI+1*VGA+1*TYPE-C female+1*RJ45+1.3.5 audio
1. Confirm whether the monitor resolution can meet the corresponding requirements before use
2. Insert the USB-C/M into the TYPE C output port of the phone/tablet/laptop
3. Insert the HDMI M/M cable into the HDMI input port of the monitor, and connect one end to USB-C TO HDMI F
4. At this time, there will be a user interface display on the monitor
5. The USB port of the product can be connected to mouse, keyboard, U disk, mobile hard disk
6. Insert the SD/TF card into the corresponding card socket to read the data in the internal memory
7. Connect the adapter cable to the TYPE C female connector of the product to charge the device
8. When using, make sure that the PIN needle in the product is not sag or bent, so as not to affect the insertion and removal
9. Be careful not to splash liquid into the connector during use, so as not to affect its performance
10. The product should be placed in a dry place, not in a humid environment
11. To connect a high-current hard disk, you need to connect PD power